 |
  |
 |
Welcome Join / Log In
|
 |
||
 |
 |
|||||
|
||||||||||||||||||||||
Custom MM Series BSM-6 |
|
Description:
BSM-6 - Micro-Binaural Stereo Microphone
Overview:
The BSM-6 is "micro-sized" Small but totally "Stealthy"! When size is an issue you can't go wrong with the micro-line!
Features & Benefits:
-Flat frequency response -Comes with "Shure" holding clips and premium windscreens. -Requires a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in- power) or one of our battery modules. -Includes Life- Time Warranty at no extra charge! Information:
The BSM-6 is excellent for low, mid and highend recordings. measurements are 6 mm wide x 5 mm long. Strategically mounted for total microphone saturation! Comes with "shure" universal holding clips (wide mouth)
More Information:
Note: If your recorder does not provide a bias voltage or if you want to feed your recorders line inputs to avoid overloading your recorder's mic pre-amplifier, you can use one of our Battery Modules. Battery Modules will power the microphones with optimum power ( 9 volts D.C ), increase dynamic range and enable the mics to handle higher (SPL) sound pressure levels ( loud sounds ) without distortionWhat's Included:
Shure universal holding clips (wide mouth)
|
Technical Specifications:
• Frequency response:
20-20,000 Hz
• Signal to noise ratio: 58dB, 1khz at 1pa • Open circuit sensitivity : -42dB (5.6 mv) re 1v at 1pa • Dynamic range: 90dB, 1kHz • Maximum Input Sound Level: 105dB SPL (120 db with one of our battery modules), 1kHz at 1% Features: • Flat frequency response • Comes with holding clips and premium windscreens • Requires a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in- power) or one of our battery modules. • Includes Life- Time Warranty at no extra charge! |
