Welcome Join / Log In
MM Series STM-3
STM-3 - Single Point Stereo 'Super T' Microphone
These little microphones are hand-made with High Quality parts to ensure long life and excellent recordings!
Features & Benefits:
-Flat Frequency Response
-Comes with Premium Windscreens & MM 360 degree (rotational) holding clip (detachable).
-Requires a bias voltage of 1.5 to 10 volts D.C.(also known as plug-in-power) or one of our battery modules
The STM-3 is a omni- directional self contained Single Point Stereo microphone similiar to the STM-2 but comes with two and a half feet of cable between the microphone housing and a 1/8" (3.5mm) gold plated stereo plug. The microphone elements(2) are mounted in a durable 1/4 " diameter brass cylinder and covered in tough rubber. This unit can be easily plugged into any minidisc,dat, or analog recorder that supplies a bias voltage of 1.5 to 10 volts D.C. (also known as plug-in-power) at the microphone input jack. Choice of color on the cylinder and the connector coverings only! (Black, Red, Green, or Blue).
These microphones produce a natural, crisp sound that provides deep bass, smooth mid-range and clean high-range with a typical frequency response of +/-2dB.
If you want to increase dynamic range and enable your microphones to handle loud sounds, checkout our optional Battery/filter Modules
Holding clip and premium windscreens included.
Frequency Response: 20-20,000Hz
Signal to Noise Ratio: 58dB, 1kHz at 1 Pa
Open Circuit Sensitivity: - 42dB(5.6mv) re 1v at 1 Pa
Maximum Input Sound Level: 105dB SPL, 1kHz at 1% FEATURES:
Flat Frequincy Response
Comes with Premium Windscreens.
Requires a bias voltage of 1.5 to 10 volts D.C.
(also known as plug-in-power) or one of our battery modules.
Includes our LIFE-TIME warranty at no extra charge!