Audio Technica

Audio Technica PRO-42

Unidirectional condenser boundary microphone


The PRO 42 is a wide-range condenser microphone with a cardioid polar pattern. It was designed for surface-mount applications such as high-quality sound reinforcement and other demanding sound pickup situations.

Product Code: AT PRO-42

Brand: Audio Technica

Ratings: Rate this item

FAQ:Have a question on this product?

124.95 usd

ORDERING OPTIONS:

Audio Technica PRO-42 Products

The PRO 42 is a wide-range condenser microphone with a cardioid polar pattern. It was designed for surface-mount applications such as high-quality sound reinforcement and other demanding sound pickup situations.

FEATURES

  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform cardioid polar pattern for maximum rejection of unwanted sounds
  • Self-contained electronics eliminate need for external power module
  • Rugged design and construction for reliable performance
  • Very low-profile design for minimum visibility.

    Included in Box:

    Audio Technica PRO-42

    OTHER INFO:

  •  

    System Requirements

  • The microphone's cardioid polar pattern provides a 120° angle of acceptance (cardioid in hemisphere above mounting surface)
  • Output is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot”— positive acoustic pressure produces positive voltage at Pin 2.
  • The microphone should be placed on a flat, unobstructed mounting surface, with the front of the microphone facing the sound source. The sound source should not be below, or higher than 60° above, the plane of the mounting surface.

    Specifications

    PRO 42 Specifications
    Element   Signal to Noise Ratio
      Condenser
      65 dB, 1 kHz at 1 Pa
    Polar Pattern Dynamic Range (Typical)
      Unidirectional
      105 dB, 1 kHz at Max. SPL
    Frequency Response Phantom Power Requirements
      70 - 14,000 Hz
      9 - 52V, 2 mA typical
    Open Circuit Sensitivity Weight
      -38 dB (12.5 mV) re 1V at 1 Pa
      1.2 oz (35 g)
    Impedance Power Module
      100 ohms
      Integral
    Maximum Input Sound Level Output Connector
      134 dB SPL, 1 kHz at 1% T.H.D.
      XLRM-type on cable

    Warranty and Support

    Warranty: All of our products have a 30 day money back guarantee from the day you receive your product. For more information, please visit our Policies page.

    We are authorized dealers and distributors of every product we sell!

  • Audio Technica PRO-42






     

     

    Overview

    Unidirectional condenser boundary microphone