ETS

ETS SM5-EA KIT

1 SM1 Microphone, SMEA-1 Interface Box


Single zone audio surveillance kit for use with powered over Ethernet I/P cameras. In line adaptor for tapping power off Ethernet powered I/P cameras to supply power to the SM1 microphone. Adaptor "breakout box" includes terminations for the microphone. Can be connected to “microphone” or “line” level inputs of POE I/P cameras. Supports both modes A and B of IEEE802.3af. For use with ETS or Louroe microphones only

Product Code: ETS SM5-EA KIT

Brand: ETS

Ratings: Rate this item

Product Group:ETS SM5-Series-ETS

FAQ:Have a question on this product?

74.99 usd

ORDERING OPTIONS:

ETS SM5-EA KIT Products

Single zone audio surveillance kit for use with powered over Ethernet I/P cameras. In line adaptor for tapping power off Ethernet powered I/P cameras to supply power to the SM1 microphone. Adaptor "breakout box" includes terminations for the microphone. Can be connected to “microphone” or “line” level inputs of POE I/P cameras. Supports both modes A and B of IEEE802.3af. For use with ETS or Louroe microphones only

FEATURES

  • SM1 Pre-amplified microphone.
  • SMEA-1 interface
  • 3’ RCA or 3.5mm Patch cable.
  • Warning label.
  • SM1 mounting screws.
  • Installation instructions

    Included in Box:

    ETS SM5-EA KIT

    OTHER INFO:

    Options:

    SPECIFY: RCA output connector OR 3.5mm when ordering

  •  

    System Requirements

    Microphone Wiring Requirements:

  • Stranded 22-gauge, 2-conductor shielded cable with drain wire. Max. cable length: 1500

    Specifications

    SM1 Microphone Specifications:

  • Omni-directional Electret element. 25’ range in all directions.
  • Frequency response: 200-16Khz.
  • Low noise MOSFET pre-amplifier.
  • Line level, unbalanced output.
  • Adjustable gain.
  • Treble boost circuit. Selectable on/off.
  • Limiter circuit. Selectable on/off.
  • 3 position Euro-style connector makes cable termination fast and clean.
  • Flush mountable. Can be mounted on a single gang electrical box.
  • Power: 12 VDC @ 10mA

    SMEA-1 Interface Specifications:

  • RCA or 3.5mm audio output jack.
  • Transformer isolated audio output.
  • Adjustable audio output level.
  • RJ45 CAT5 in/out jacks.
  • Modes A and B of IEE802.3af supported. A/B mode switch selectable.
  • Straight through CAT5 connections (no crossover)
  • Voltage input: 48-60Vdc
  • 15vdc internal Voltage regulator supplies power to microphone. Current consumption:15ma with microphone connected.
  • Euro-style connector makes cable termination of microphone fast and clean.
  • Led power indicator
  • Auto polarity protected & fused.
  • Dimensions: L 3.3 x W 2.0 x H 1.6

    Warranty and Support

    Warranty: All of our products have a 30 day money back guarantee from the day you receive your product. For more information, please visit our Policies page.

    We are authorized dealers and distributors of every product we sell!

  • ETS SM5-EA KIT


    Part of the ETS SM5-Series-ETS





     

     

    Overview

    1 SM1 Microphone, SMEA-1 Interface Box