ETS

ETS SMA1-HP-C5

Microphone / 30 Watt speaker amplifier Interface


The SMA1-HPC5 is a high power Speaker / microphone interface for use with DVRs or I/P cameras. Typically used in 2-way audio surveillance systems where high public address volume is required. The SMA1-HPC5 is designed to drive a single speaker/ microphone at 30 watts such as our HSM11-C5.

Product Code: ETS SMA1-HP-C5

Brand: ETS

Ratings: Rate this item

Product Group:ETS SMA1-Series-ETS

FAQ:Have a question on this product?

198.39 usd

ORDERING OPTIONS:

ETS SMA1-HP-C5 Products

The SMA1-HPC5 is a high power Speaker / microphone interface for use with DVRs or I/P cameras. Typically used in 2-way audio surveillance systems where high public address volume is required. The SMA1-HPC5 is designed to drive a single speaker/ microphone at 30 watts such as our HSM11-C5.

FEATURES

  • Includes: Two 6' RCA (or specify 3.5mm) patch cords and 24Vac 50va AC adapter.
  • Single CAT5 cable run up to 350' between SMA1-MPC5 and speaker/microphone.
  • Line level (0db) audio input and output.
  • Standard RCA or 3.5mm jacks for connection to DVRs etc.
  • Terminals for connecting a call switch or Door lock relay
  • Adjustable independent volume controls for speaker and microphone.
  • 30 Watts RMS power output (70v balanced line).
  • Balanced 600 Ohm microphone signal transmission. Audio is transformer converted to unbalanced.
  • Frequency response 200-10Khz.
  • Short circuit protected.
  • Built in 70V 30w audio power transformer.
  • Dimensions. L 7.0 x W 4.5 x H 4.5

    Included in Box:

    ETS SMA1-HP-C5

  • SMA1-HPC5 Speaker driver / microphone interface.
  • 24 VAC 50VA AC adapter.
  • 2 each 6’ RCA or 3.5mm patch cable.
  • Installation instructions.

    OTHER INFO:

  •  

    Specifications

    SMA1-HPC5 Speaker/Mic. interface:

  • Single CAT5 cable run up to 350' between SMA1-HPC5 and speaker/microphone. Line level (0db) audio input and outputs.
  • Standard RCA or 3.5mm jacks for connection to DVRs etc.
  • Adjustable independent volume controls for speaker and microphone.
  • 30 Watts RMS power output (70v balanced line).
  • Balanced 600 Ohm microphone signal transmission. Audio is transformer converted to unbalanced.
  • Frequency response 200-10Khz.
  • Short circuit protected.
  • Built in 70V 30w audio power transformer.
  • Euro-style connectors makes speaker and microphone cable terminations fast and clean.
  • LED power indicator and Auto reset fused.
  • Call sw: unreferenced, 2 free terminals.
  • Power:24 VAC @ 2000mA
  • Grey plastic ABS housing.
  • Dimensions: L 5.3 x W 3.3 x H 1.6

    Warranty and Support

    Warranty: All of our products have a 30 day money back guarantee from the day you receive your product. For more information, please visit our Policies page.

    We are authorized dealers and distributors of every product we sell!

  • ETS SMA1-HP-C5


    Part of the ETS SMA1-Series-ETS





     

     

    Overview

    Microphone / 30 Watt speaker amplifier Interface