ETS

ETS SMA1-LPEA-C5

Ethernet powered I/P camera microphone/speaker interface box


Two-way audio In line adaptor for tapping power off Ethernet powered I/P cameras to supply power to ETS Sound Surveillance speaker / microphones. Built-in 2.5W speaker power amplifier and CAT5 connections to ETS speaker / microphone. 3.5mm (or RCA) input / output jacks for connections to "microphone" / "line input" and "line output" of I/P cameras. Supports both modes A and B of IEEE802.3af.

Product Code: ETS SMA1-LPEA-C5

Brand: ETS

Ratings: Rate this item

Product Group:ETS SMA1-Series-ETS

FAQ:Have a question on this product?

108.26 usd

ORDERING OPTIONS:

ETS SMA1-LPEA-C5 Products

Two-way audio In line adaptor for tapping power off Ethernet powered I/P cameras to supply power to ETS Sound Surveillance speaker / microphones. Built-in 2.5W speaker power amplifier and CAT5 connections to ETS speaker / microphone. 3.5mm (or RCA) input / output jacks for connections to "microphone" / "line input" and "line output" of I/P cameras. Supports both modes A and B of IEEE802.3af.

FEATURES

  • Includes: Two 6' 3.5mm patch cord (or specify RCA)
  • RCA or 3.5mm audio input / output connectors
  • Microphone or line level output.
  • Speaker line level audio input.
  • Transformer isolated audio input and output.
  • Adjustable audio input / output levels.
  • 2.5 Watt speaker power amplifier
  • RJ45 (CAT5) speaker / microphone output for connection to ETS speaker / microphones.
  • RJ45 in/out jacks
  • Straight through CAT5 connections (no crossover)
  • A/B mode switch for IEE802.3af power format.
  • Internal switching regulator converts POE 48Vdc to 15Vdc for internal speaker power amplifier and microphone power supply.
  • Current consumption 50ma. Maximum
  • Led power indicator.
  • Terminals for connecting a call switch or door lock relay at speaker / microphone and interface box.
  • Auto polarity protected & fused.
  • Dimensions: L 5.3 x W 3.3 x H 1.6

    Included in Box:

    ETS SMA1-LPEA-C5

  • SMA1-LPEA-C5 interface
  • 2 ea. 3’ RCA or 3.5mm Patch cables.
  • Installation instructions

    OTHER INFO:

    Specifying audio output cable part numbers:

  • SMA1-LPEA-C5
    3.5mm connector/patch

  • SMA1-LPEA-C5-RCA
    RCA connector/patch

  • SMA1-LPEA-C5-FL
    Flying leads for termination on screw terminal type blocks.

  •  

    System Requirements

    Speaker/Microphone Wiring Requirements:

    1ea. CAT5 cable, 1000’ max

    Specifications

    SMA1-LPEA-C5 Interface Specifications

  • Standard RCA or 3.5mm (please specify) jack for connection to POE I/P camera “microphone” or “line” level input and “line level” output.
  • Transformer isolated audio input / output: 5k Ohm input / output impedance.
  • Adjustable audio input and output levels.
  • RJ45 CAT5 in/out jacks (PoE)
  • Straight through CAT5 connections (no crossover)
  • RJ45 CAT5 Speaker / Microphone jack.
  • Modes A and B of IEE802.3af supported. A/B mode switch selectable.
  • Voltage input: 48-60Vdc
  • 15vdc internal switching type Voltage regulator supplies power to Speaker / microphone
  • Current consumption: 50ma at 2.5Watts speaker power level.
  • Terminals for connecting a call switch or door lock relay at speaker / microphone and interface box.
  • LED power indicator.
  • Auto polarity protected and fused.
  • Dimensions: L 5.5 x W 3.3 x H 1.6

    Warranty and Support

    Warranty: All of our products have a 30 day money back guarantee from the day you receive your product. For more information, please visit our Policies page.

    We are authorized dealers and distributors of every product we sell!

  • ETS SMA1-LPEA-C5


    Part of the ETS SMA1-Series-ETS





     

     

    Overview

    Ethernet powered I/P camera microphone/speaker interface box